Microprocessor step / profile PID temperature controller

PID temperature controller, for installation in a panel and machine / control panel of a processing device, relay outputs, measurement range -100°C ... +1750°C, resolution / step 0.1ºC, 20 temperature degrees / heating degrees (produced in Turkey, TENSE)

As can be seen from the graphs shown above, unlike cheap analogs, the TENSE thermostat allows you to set limit temperatures and the time in which the temperature must reach the specified values. This significantly simplifies the programming process. The PID mode further allows for maintaining the system temperature as close to the set values as possible.

An important difference compared to the competition is the simultaneous indication of the current temperature, set temperature, adjustment steps, and time. It is very practical to have START/STOP/PAUSE/SET control buttons on the front panel - this ensures quick and efficient management of your technological processes.

Temperature control is possible using on/off or PID control. The controller offers self-optimization that prevents overshooting the process value.

• Automatic adjustment of PID parameters

• Adjustment up to 20 temperature degrees / heating degrees

• Each step is programmed for up to 18 hours of operation

• Sensor type: T/C (J,K,T,S,R), Pt100
• Optional control type: P, PI, PD, PID, or ON-OFF

• Automatic removal of 'overshoot' in PID mode

• Anti-windup

• Delay on turning ON for OUT in cooling mode

• Password protection

• EEPROM memory for storing settings

• Relay outputs OUT (NO+NC) 250VAC, 2A

The measurement range depends on the sensor and can be set using the buttons on the temperature controller.

Please do not forget to order our temperature probes - type J thermocouple Fe-Const (metric 6/8) with a temperature measurement range: -100 °C – +600 °C. It can be with a cable length of 1 m, 1.5 m, 2 m, 2.5 m, 3 m, 4 m, and 5 meters long

Online payment by card - after completing the order, you will be redirected to the payment gateway, payment confirmation will be sent to your email

Dobírka - úhrada dle platního predpisu zaplatíte dričíci převtní sompaniés

Translation - you will receive an advance invoice on your e-mail no later than the next working day, which will contain the account number you entered when paying.

On the invoice - this payment option is available to partners who have signed a framework agreement with our company.

If you would like to use the last 2 methods, please contact our manager and he will give you instructions, so you can get an invoice with VAT or without VAT.

The electrical equipment supplied by us meet high quality standards, have a 24-month warranty and meet all EU requirements.

In the case of a complaint, no fee is charged for returning the goods.